Super user mode
Do not enter Super User mode when a patient is
connected to the system. Gas flow will cease, and the
system must be powered down in order to restart gas
flow.
Changes made in Super User mode affect the system
configuration. All changes made are permanent and
preserved until changed again.
Several settings can be changed in Super User mode. These
changes should only be made by the person responsible for the
configuration of the system.
To access the Super User mode, select System Setup and then
Super User. The Super User mode is password protected. Contact
the sales representative to obtain the password.
The system must be turned off to exit Super User mode.
Menu items are dependant on system configuration. Inactive menu
items are gray and are not selectable.
The menu selections shown in the examples are the factory default
values. The available settings are shown to the right of the menu.
WARNING
•
Note
Note
Aisys CS²
12-2 2067226-001
To Next Page
Loading...
