GE auisys cs2

Table of Contents
1 Introduction
Intended use
.....................................1-2
Indications for use ..............................1-2
General information .............................1-2
Serial numbers .................................1-4
Trademarks ...................................1-5
Symbols used in the manual or on the equipment ........1-6
Symbols used on the equipment ...................1-6
Symbols used on the user interface ................1-9
Typeface conventions used ........................ 1-10
Abbreviations ....................................1-11
System information ...............................1-14
System classification ...........................1-14
Device standards IEC 60601-1:2005 .............. 1-14
Device standards IEC 60601-1:1988 .............. 1-14
Integral system components .....................1-15
Not integral system components ..................1-15
System accessories ............................1-15
System safety ................................... 1-16
Preparing for use ..............................1-16
Inspecting the system ..........................1-17
Electrical safety ...............................1-18
2 System controls and menus
System overview ..................................2-2
Using the brake ................................2-4
Using the O2 flush button ........................2-4
Positioning the display ...........................2-4
Advanced breathing system components ...............2-6
Using the bag support arm .......................2-7
2067226-001 i