Attaching equipment to the top of the machine
The top of the machine has a weight limit of 45 kg (100
lb).
Check the stability of the system in its final configuration.
Make sure the weight is evenly distributed throughout the
system.
1.
Locate the clips or straps.
2. Install the straps. See the "Parts" section for strap ordering
information.
3. Fully tighten the straps.
4. Make sure the straps hold the equipment in position.
Fully tighten the straps. If straps are not fully tightened,
equipment can fall off the top of the machine.
WARNING
•
WARNING
Aisys CS²
8-20 2067226-001
To Next Page
Loading...
