Alarms On Off
Use the Alarms On/Off
menu to turn On or turn Off the CO2 Alarms
Limits and MV/TV Alarm Limits during manual ventilation. Alarm
limits are enabled at the start of mechanical ventilation.
The CO2 ‘Apnea’ alarm cannot be turned off through the Alarms
On/Off menu. Only the ‘EtCO2’ and ‘FiCO2’ alarms are turned off
using this menu.
Disable alarm limits
1. Select Alarms On/Off.
2. View the alarm limit status.
3. Select Confirm to change the alarm limit settings. Select
Cancel to leave the alarm limits unchanged.
• If the CO2 Alarms Limits and MV/TV Alarm Limits are
On, the alarm limits change to Off.
• If the CO2 Alarms Limits or MV/TV Alarm Limits are On,
the alarm limits change to Off.
• If the CO2 Alarms Limits and MV/TV Alarm Limits are
Off, the alarm limits change to On.
Note
3 Operation
2067226-001 3-21
To Next Page
Loading...
Need help?
General
