2. Select a menu item to choose the item, or turn the ComWheel
left or right to highlight a menu item and then push to confirm.
3.
If the menu item selected is an adjustment, turn the ComWheel
left or right to make the setting and then push to confirm.
If the menu item has a drop-down list, select the desired value
from the list by touching the item.
4. Select Close, touch the waveform area, or push the Home key
to exit the menu.
Using the ComWheel
Use the ComWheel to scroll through the quick key settings and
function keys, make selections, change settings, and confirm
settings.
• Push the ComWheel to make a selection.
• Turn the ComWheel to the right.
For menu items, the highlight moves down.
For quick keys, the highlight moves to the next key on the right.
For settings, the value changes to the next available setting.
For pull-down selections, the highlight moves to the next
available selection.
• Turn the ComWheel to the left.
For menu items, the highlight moves up.
For quick keys, the highlight moves to the next key on the left.
For settings, the value changes to the previous available setting.
For pull-down selections, the highlight moves to the previous
available selection.
• Push the ComWheel to confirm a setting.
Using quick keys
The gas settings and the main ventilator settings for each ventilation
mode can be changed using the quick keys.
1. Select a quick key to open the menu or select a parameter.
2. If Gas Setup, Mode, or More Settings is selected, a menu
displays. Select the desired value on the menu by touching the
value.
If any other quick key is selected, the value displays with a
highlight. Turn the ComWheel left or right to set the desired
value.
3. Push the ComWheel or select the quick key to confirm the
change.
Aisys CS²
2-16 2067226-001
To Next Page
Loading...
Need help?
General
