GE auisys cs2

Setting up the absorber canister ......................8-5
When to change the absorbent ....................8-6
Removing a canister ............................8-7
Removing an EZchange canister ..................8-7
Filling the Reusable Multi Absorber canister ......... 8-8
Electrical connections .............................8-10
Mains inlet ...................................8-10
Equipotential stud .............................8-10
Outlets ......................................8-10
Serial port ................................... 8-11
Pneumatic connections ............................8-12
Pipeline inlets ................................ 8-12
Scavenging ..................................8-12
Sample gas return port .........................8-14
Pneumatic power outlet .........................8-15
Vacuum suction regulator (optional) ...............8-15
Venturi suction regulator (optional) ................8-16
Auxiliary O2 flowmeter (optional) ................. 8-16
Installing gas cylinders ............................ 8-18
Installing cylinders with pin indexed yokes ..........8-18
Installing cylinders with DIN connections ...........8-18
Performing a high-pressure leak test .............. 8-18
Attaching equipment to the top of the machine ......... 8-20
Passive AGSS ...................................8-21
Connecting passive AGSS ......................8-21
Active AGSS ....................................8-22
Connecting active AGSS with a flow indicator .......8-22
Connecting active adjustable AGSS ...............8-23
9 User maintenance
Maintenance safety ................................9-2
Repair policy .....................................9-3
Maintenance summary and schedule ..................9-4
Aisys CS²
vi 2067226-001