GE Dash 4000 Service Manual

Troubleshooting: Wireless LAN
2000966-542D Dash 3000/4000/5000 6-29
Analyze WIRELESS LAN STATUS screen
Display the WIRELESS LAN STATUS screen by entering Service
Mode (see “Access Service Mode” on page 6-25) and selecting MONITOR
SETTINGS > WIRELESS LAN STATUS.
The WIRELESS LAN STATUS screen displays the same information as
the WIRELESS LAN ID field along with advanced status fields.
Personnel with specialized training (hospital IT or network engineer) can
interpret this information.
1. Check that the information updates every 4 seconds indicating
communication.
2. Check for the following status information:
3. If the ASSOCIATION status in the WIRELESS LAN STATUS
window is other than CONNECTED, see “Confirm or configure
wireless LAN” on page 4-14 to check if the wireless feature is
enabled.
Contact GE Technical Support for additional assistance.
ASSOCIATION CONNECTED
TRANSMIT RATE Greater than 5.5 Mbit
PERCENT CRC ERRORS 00
TRANSMIT FAILURES 00000
945A
Check these
values to
determine network
communication
Check this value
to determine if
wireless is
enabled

GE Dash 4000 Specifications

General

Resolution	640 x 480 pixels
Power Supply	100-240 VAC, 50/60 Hz
ECG	3/5/12-lead
IBP	Up to 4 channels
Battery Backup	Yes
Certifications	CE, UL, CSA
Parameters Monitored	ECG, SpO2, NIBP, IBP, Temperature, Respiration, Cardiac Output
Connectivity	Ethernet, USB, Serial
Display Type	TFT LCD
Recorder	Integrated thermal printer
Battery Type	Lithium-ion
Operating Temperature	0 to 40°C
Storage Temperature	-20 to 60°C
Humidity Range	15% to 95% non-condensing
Display Size	10.4 inches
Cardiac Output	Available