GE ImageQuant LAS 4000 - Page 58

ActionStep
Select Auto or Manual for Exposure Time.
4
ManualAuto
Select an exposure time from the drop-down list or enter
the exposure time manually. The exposure time can be set
from 0.01 seconds up to 30 hours.
Note:
Automatic exposure
time setting may not
be possible depend-
ing on the sample
type and method.
Select Sensitivity/Resolution.
5
TIP:
Select “Sensitivity/Resolution...” in the Help menu. You can display Help that describes
the relation between sensitivity and resolution.
Click the Start button. The orange Busy LED lights on the instrument and a progress dialog is displayed
during exposure.
6
58 ImageQuant LAS 4000 User Manual 28-9607-42 AB
4 Operating the ImageQuant LAS 4000
4.9 Exposing dye stained samples and films (Trans illumination)