22 994-0155-1.00-1 GE Information
Unpacking
Please read the manual carefully before unpacking the board or module or fitting the device into your system.
Also adhere to the following:
• Observe all precautions for electrostatic sensitive modules
• Do not place the board on conductive surfaces, anti-static plastic, or sponge, which can cause shocks
and lead to board trace damage.
• Do not exceed the specified operational temperatures.
• Keep all original packaging material for future storage or warranty shipments of the board.
Although the products are carefully packaged to protect against the rigors of shipping, it is still possible that
shipping damage can occur. Careful inspection of the shipping carton should reveal some information about
how the package was handled by the shipping service. If evidence of damage or rough handling is found, you
should notify the shipping service and GE Technical Support as soon as possible.
PCIe Cards and storage devices may also have temperature restrictions
Retain all packing material in case of future need.
Before installing or removing any board, please ensure that the system power and external supplies have
been turned off!
To Next Page
Loading...
