GE Multilin G100 - Figure 6: Single D.20 Link, Redundant LAN - Topology; Table 16: Dual D.20 Link Terminated - Default Settings

G100 Instruction Manual
GE Information
994-0155-1.00-1
47
D.20 redundant LAN daughter card can optionally be installed with the corresponding configuration
(Redundant Link) in DSAS.
The last D.20 peripheral must be terminated with D.20 terminator (GE part#: 977-0049).
Table 16: Dual D.20 link terminated – Default settings
Function
State
End of Link - D.20 Channel 1
ON
End of Link - D.20 Channel 2
ON
Port B - D.20 Channel 1 (pin 6/7)
OFF
Port B - D.20 Channel 2 (pin 2/3)
ON
Single D.20 link, redundant LAN
Figure 6: Single D.20 link, redundant LAN - Topology