GE Multilin G100 - Table 20: SFP Modules Supported by the G100

G100 Instruction Manual
GE Information
994-0155-1.00-1
55
Each SFP port is isolated to 1.5KV AC / 2.1KV DC
For corresponding SFP modules and order codes see following sections in this document:
Order Code
Spares and Accessories
The following table presents in detail the SFP modules supported by the G100.
Table 20: SFP modules supported by the G100
Item Description Manufacturer
Mfg Part
b
580-3784
SFP Module 100BASE-FX LC
TRANSCEIVER OPTICAL
AVAGO HFBR-57E0APZ
580-3785
SFP Module 1000BASE-SX LC
TRANSCEIVER OPTICAL
AVAGO AFBR-5710ALZ
FINISAR FTLF8519P3BTL
580-3786
SFP Module 1000BASE-TX RJ45
TRANSCEIVER COPPER
FINISAR FCLF8522P2BTL
FOXCONN ABCU-5730ARZ
FOXCONN ABCU-5731ARZ
0123-0004
SFP Module 10/100BASE-TX RJ45
TRANSCEIVER COPPER
AXCEN AXFE-R1S4-05H3
580-3787
SFP Module 1000Base-LX LC
TRANSCEIVER OPTICAL SINGLE-MODE
5km 1310nm -40 to 85C
FOXCONN
(AVAGO)
AFCT-5715ALZ
The cables required to make physical connections to the G100 are as follows: