GE Multilin G100 User Manual

G100 Instruction Manual
62 994-0155-1.00-1 GE Information
D.20 Link HDLC
Communications
A dual channel card is available to communicate D.20 Link protocol to
up 60 D20 Peripherals per channel. Each channel communicates at
250kbps.
Channels are isolated from each and from other internal circuits.
Time synchronization IRIG-B (TTL) Input Connector available as 2 positions removable Phoenix
terminal block on bottom panel
Video Output
DisplayPort (DP) version 1.2 available on top panel
USB Ports 1x USB 3.0 Type A (male) on top panel
2x USB 2.0 Type A (male) on top panel
1x USB 2.0 Type C (male) on top panel (Future use)
Electrical
G100 rated input Nominal 12/24/48 VDC ±10%, 5A/2.5A/1.25A
Minimum/Maximum DC voltage: 10 VDC to 60 VDC
GPIO (DI/DO/AI) Isolation rating: 820V
RMS
/1150V
DC
G100 Environmental Specifications
Temperature and Humidity
Storage
-40°C to 85°C
Operating Conditions
-40°C to 70°C
Humidity
5%~90% relative humidity, non-condensing
Ingress Protection (IEC 60529)
IP40 (protected from most wires and slender screwstools greater than 1 millimeter).

GE Multilin G100 Specifications

General

Brand	GE
Model	Multilin G100
Category	Gateway
Language	English