D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
3-44 Section 3-6 - Configuration
PRELIMINARY
Section 3-8
Connectivity Setup
NOTE: If connected to a stand-alone network (Peer-to-Peer network with a Venue™ scanner, and an optional
network printer), you should use default delivery settings.
3-8-1 Introduction
To be able to use the network functions when connected to a hospital network, the Venue™ must have
a proper network address.
• Before you can set up the Venue™ , you need to collect some information.
• The Worksheet (see sample Connectivity Installation Worksheet on page 2 - 13) can be used for
gathering this information.
• Typical source for this information is the network administrator.
To Next Page
Loading...
