8-212 Section 8-9 - Operating System and Application Software Loading Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
8-9-7 Software Recovery Procedure
NOTE: Images in this procedure are for reference only. There may be differences or variations, in accordance
with different software versions.
The software recovery procedure allows the user to reload the operating system and the application
(Drive C:\ partition) without affecting any user information or PHI data.
This procedure can be initiated from the configuration screen under the Service tab.
1.) Boot the system into the application screen and open the Config menu.
2.) Open the Service tab.
3.) Select SW Recovery.
Figure 8-256 Service Tab
To Next Page
Loading...
