8-178 Section 8-8 - Peripherals Replacement/Installation Procedures
D
IRECTION 5771498-100, REVISION 6 VENUE™ SERVICE MANUAL
PRELIMINARY
3.) Unscrew the two thumbscrews holding the printer bracket and remove the printer with the bracket.
4.) Remove four screws connecting the printer to the bracket.
5.) Attach the ECG bracket to the printer bracket with 2 screws and 2 washers (verify correct
orientation).
Figure 8-194 Disconnecting Printer
Figure 8-195 Disconnecting Printer
Figure 8-196 Attaching ECG Bracket to Printer
To Next Page
Loading...
