2 ADV100 • Functions description and parameters list
Informationaboutthismanual
This manual explains the functions and the description of the parameters.
The informations about mechanical installation, electrical connection and fast start-up can be found on the ADV100
Quick start guide.
The whole set of manuals (included the expansions and eld bus manuals) can be found on the CD provided with
the dirve.
Softwareversion
This manual is updated according the software version V 1.X.0.
Variation of the number replacing “X” have no inuence on the functionality of thedevice.
The identication number of the software version is indicated on the identication plate of the drive or can be
checked with the Firmware ver.rel - PAR 490 parameter, menu 2.5.
Generalinformation
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the term “Drive”
will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a safe place and available
to engineering and installation personnel during the product functioning period.
Gefran S.p.A has the right to modify products, data and dimensions without notice. The data can only be used for the
product description and they can not be understood as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improvingthis manual. The e-mail address is
the following: techdoc@gefran.com.
All rights reserved
To Next Page
Loading...
Need help?
General
