GEM GPS3600 User Manual

○○○○○○○○○○○○○○○○○○○○○○
Disk 4•23
○○○○○○○○○○○○○○○○○○○○○○
Disk 4•23
FORMAT MS-DOS DISK (1.44 MB)
This operation formats a 3.5” HD floppy disk in
MS-DOS format (capacity: 1.44 megabytes).
This format permits file exchange with comput-
ers running MS-DOS, Windows, OS/2, Macin-
tosh, Atari, Amiga, and all computers capable of
reading MS-DOS format disks.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
FORMAT MS-DOS/ATARI DISK (720 KB)
This operation formats a 3.5” DD floppy disk in
MS-DOS / Atari ST format (capacity: 720 kilo-
bytes), suitable in particular for MIDI file ex-
changes.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
CHANGE DISK NAME
Use this operation to assign a name to a floppy
disk. Giving your disks a specific name allows
quick recognition of the contents during a search
through disks without labels. If you write the disk’s
name on the index label, you can reduce the
search times even further.
PS/GPS assigns a generic code name to disks
formatted with the Utility formatting procedures -
the name depending on the size.
For example, a 1.62 Mb work disk will be assigned
a code name such as the one shown below:
Use the standard name entry procedure to give
your disks a name.
Confirm the entry with ENTER or cancel with
Escape.
HARD DISK UTILITY
FORMAT HARD DISK
This operation formats the Hard disk and is used
a when rapid cancellation of the HD contents is
required. Use this operation with extreme cau-
tion !
1. Go to the Hard Disk Utility page and select
(if necessary) the «Format Hard Disk» func-
tion.
The following dialog window appears:
2. Press ENTER to confirm or ESCAPE to cancel.
As a security measure, a second confirma-
tion request appears:
3. Press the Soft button F1 (NOT ENTER) to start
the Hard Disk format procedure, or ESCAPE
to cancel.
FORMAT MS-DOS DISK (1.44 MB)
This operation formats a 3.5” HD floppy disk in
MS-DOS format (capacity: 1.44 megabytes).
This format permits file exchange with comput-
ers running MS-DOS, Windows, OS/2, Macin-
tosh, Atari, Amiga, and all computers capable of
reading MS-DOS format disks.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
FORMAT MS-DOS/ATARI DISK (720 KB)
This operation formats a 3.5” DD floppy disk in
MS-DOS / Atari ST format (capacity: 720 kilo-
bytes), suitable in particular for MIDI file ex-
changes.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
CHANGE DISK NAME
Use this operation to assign a name to a floppy
disk. Giving your disks a specific name allows
quick recognition of the contents during a search
through disks without labels. If you write the disk’s
name on the index label, you can reduce the
search times even further.
PS/GPS assigns a generic code name to disks
formatted with the Utility formatting procedures -
the name depending on the size.
For example, a 1.62 Mb work disk will be assigned
a code name such as the one shown below:
Use the standard name entry procedure to give
your disks a name.
Confirm the entry with ENTER or cancel with
Escape.
HARD DISK UTILITY
FORMAT HARD DISK
This operation formats the Hard disk and is used
a when rapid cancellation of the HD contents is
required. Use this operation with extreme cau-
tion !
1. Go to the Hard Disk Utility page and select
(if necessary) the «Format Hard Disk» func-
tion.
The following dialog window appears:
2. Press ENTER to confirm or ESCAPE to cancel.
As a security measure, a second confirma-
tion request appears:
3. Press the Soft button F1 (
NOT ENTER) to start
the Hard Disk format procedure, or ESCAPE
to cancel.
○○○○○○○○○○○○○○○○○○○○○○
Disk 4•23
○○○○○○○○○○○○○○○○○○○○○○
Disk 4•23
FORMAT MS-DOS DISK (1.44 MB)
This operation formats a 3.5” HD floppy disk in
MS-DOS format (capacity: 1.44 megabytes).
This format permits file exchange with comput-
ers running MS-DOS, Windows, OS/2, Macin-
tosh, Atari, Amiga, and all computers capable of
reading MS-DOS format disks.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
FORMAT MS-DOS/ATARI DISK (720 KB)
This operation formats a 3.5” DD floppy disk in
MS-DOS / Atari ST format (capacity: 720 kilo-
bytes), suitable in particular for MIDI file ex-
changes.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
CHANGE DISK NAME
Use this operation to assign a name to a floppy
disk. Giving your disks a specific name allows
quick recognition of the contents during a search
through disks without labels. If you write the disk’s
name on the index label, you can reduce the
search times even further.
PS/GPS assigns a generic code name to disks
formatted with the Utility formatting procedures -
the name depending on the size.
For example, a 1.62 Mb work disk will be assigned
a code name such as the one shown below:
Use the standard name entry procedure to give
your disks a name.
Confirm the entry with ENTER or cancel with
Escape.
HARD DISK UTILITY
FORMAT HARD DISK
This operation formats the Hard disk and is used
a when rapid cancellation of the HD contents is
required. Use this operation with extreme cau-
tion !
1. Go to the Hard Disk Utility page and select
(if necessary) the «Format Hard Disk» func-
tion.
The following dialog window appears:
2. Press ENTER to confirm or ESCAPE to cancel.
As a security measure, a second confirma-
tion request appears:
3. Press the Soft button F1 (NOT ENTER) to start
the Hard Disk format procedure, or ESCAPE
to cancel.
FORMAT MS-DOS DISK (1.44 MB)
This operation formats a 3.5” HD floppy disk in
MS-DOS format (capacity: 1.44 megabytes).
This format permits file exchange with comput-
ers running MS-DOS, Windows, OS/2, Macin-
tosh, Atari, Amiga, and all computers capable of
reading MS-DOS format disks.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
FORMAT MS-DOS/ATARI DISK (720 KB)
This operation formats a 3.5” DD floppy disk in
MS-DOS / Atari ST format (capacity: 720 kilo-
bytes), suitable in particular for MIDI file ex-
changes.
The procedure is identical to that described for
the «Format work disk (1.62 Mb)» operation.
CHANGE DISK NAME
Use this operation to assign a name to a floppy
disk. Giving your disks a specific name allows
quick recognition of the contents during a search
through disks without labels. If you write the disk’s
name on the index label, you can reduce the
search times even further.
PS/GPS assigns a generic code name to disks
formatted with the Utility formatting procedures -
the name depending on the size.
For example, a 1.62 Mb work disk will be assigned
a code name such as the one shown below:
Use the standard name entry procedure to give
your disks a name.
Confirm the entry with ENTER or cancel with
Escape.
HARD DISK UTILITY
FORMAT HARD DISK
This operation formats the Hard disk and is used
a when rapid cancellation of the HD contents is
required. Use this operation with extreme cau-
tion !
1. Go to the Hard Disk Utility page and select
(if necessary) the «Format Hard Disk» func-
tion.
The following dialog window appears:
2. Press ENTER to confirm or ESCAPE to cancel.
As a security measure, a second confirma-
tion request appears:
3. Press the Soft button F1 (
NOT ENTER) to start
the Hard Disk format procedure, or ESCAPE
to cancel.

GEM GPS3600 Specifications

General

Brand	GEM
Model	GPS3600
Category	Musical Instrument
Language	English