○○○○○○○○○○○○○○○○○○○○○○
7•2 Vocal Processor
○○○○○○○○○○○○○○○○○○○○○○
7•2 Vocal Processor
ACTIVATE THE VOCAL PROCESSOR
The Vocal Processor operates only if both the
Mic/Line On/Off and Vocal Processor On/Off op-
tions in Edit General are enabled. These are
enabled by default, but should they have been
disabled, here’s how to activate the functions.
Select the GENERAL editor under the EDIT but-
ton, select the Mic/Line function and, if neces-
sary, enable the Mic/Line On/Off and Vocal On/
Off options with the corresponding Soft buttons.
Press ESCAPE or EDIT to exit Edit General and
return to the Edit Effects section.
The instrument will memorize the status of the
selected parameters even after power down.
ACTIVATE THE VOCAL PROCESSOR
The Vocal Processor operates only if both the
Mic/Line On/Off and Vocal Processor On/Off op-
tions in Edit General are enabled. These are
enabled by default, but should they have been
disabled, here’s how to activate the functions.
Select the GENERAL editor under the EDIT but-
ton, select the Mic/Line function and, if neces-
sary, enable the Mic/Line On/Off and Vocal On/
Off options with the corresponding Soft buttons.
Press ESCAPE or EDIT to exit Edit General and
return to the Edit Effects section.
The instrument will memorize the status of the
selected parameters even after power down.
○○○○○○○○○○○○○○○○○○○○○○
7•2 Vocal Processor
○○○○○○○○○○○○○○○○○○○○○○
7•2 Vocal Processor
ACTIVATE THE VOCAL PROCESSOR
The Vocal Processor operates only if both the
Mic/Line On/Off and Vocal Processor On/Off op-
tions in Edit General are enabled. These are
enabled by default, but should they have been
disabled, here’s how to activate the functions.
Select the GENERAL editor under the EDIT but-
ton, select the Mic/Line function and, if neces-
sary, enable the Mic/Line On/Off and Vocal On/
Off options with the corresponding Soft buttons.
Press ESCAPE or EDIT to exit Edit General and
return to the Edit Effects section.
The instrument will memorize the status of the
selected parameters even after power down.
ACTIVATE THE VOCAL PROCESSOR
The Vocal Processor operates only if both the
Mic/Line On/Off and Vocal Processor On/Off op-
tions in Edit General are enabled. These are
enabled by default, but should they have been
disabled, here’s how to activate the functions.
Select the GENERAL editor under the EDIT but-
ton, select the Mic/Line function and, if neces-
sary, enable the Mic/Line On/Off and Vocal On/
Off options with the corresponding Soft buttons.
Press ESCAPE or EDIT to exit Edit General and
return to the Edit Effects section.
The instrument will memorize the status of the
selected parameters even after power down.
To Next Page
Loading...
Need help?
General
