○○○○○○○○○○○○○○○○○○○○○○
8•8 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
8•8 Reference Guide
RESTORE ALL (F3)
This operation cancels all user programmed data
currently in RAM (Presets, User Styles, Style-
Presets, Songs) and restores the instrument to
its factory-set status (RAM empty).
Pressing F3 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLES (F4)
This operation cancels all User Styles in RAM
(including User Style-Presets) residing in the User
1, 2, 3 and 4 buttons of the STYLE GROUPS.
The User slots are restored to the factory-set
conditions (empty: “User”).
Pressing F4 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE PRESET (F5)
This operation cancels all user-programmed Pre-
sets in RAM residing in the 8 buttons of the PRE-
SET GROUPS. The status of the Preset param-
eters are restored to the factory-set values.
Pressing F5 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SONGS (F6)
This operation cancels all Song in RAM. The
Songs memory is restored to the factory-set sta-
tus (empty: “User”).
Pressing F6 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLE-PRESET (F7)
This operation cancels all user-programmed
Style-Presets associated to the ROM STYLES.
The status of the Style-Preset parameters are
restored to the factory-set values. ROM Styles
associated to modified Style-Presets are identi-
fied by an asterisk (*) after the Style name.
Pressing F7 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SOUNDS (F8)
This operation restores the Sound configuration
to the original factory-set situation, cancelling all
User edited Sounds previously stored to user lo-
cations. This operation is particularly useful to
restore the original PS/GPS sound set (over 1,000
sounds) after loading a sound configuration from
a previous series PS/GPS disk (about 600
sounds) using the Load All Sounds or Load Block
procedures.
Pressing F8 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE ALL (F3)
This operation cancels all user programmed data
currently in RAM (Presets, User Styles, Style-
Presets, Songs) and restores the instrument to
its factory-set status (RAM empty).
Pressing F3 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLES (F4)
This operation cancels all User Styles in RAM
(including User Style-Presets) residing in the User
1, 2, 3 and 4 buttons of the STYLE GROUPS.
The User slots are restored to the factory-set
conditions (empty: “User”).
Pressing F4 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE PRESET (F5)
This operation cancels all user-programmed Pre-
sets in RAM residing in the 8 buttons of the PRE-
SET GROUPS. The status of the Preset param-
eters are restored to the factory-set values.
Pressing F5 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SONGS (F6)
This operation cancels all Song in RAM. The
Songs memory is restored to the factory-set sta-
tus (empty: “User”).
Pressing F6 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLE-PRESET (F7)
This operation cancels all user-programmed
Style-Presets associated to the ROM STYLES.
The status of the Style-Preset parameters are
restored to the factory-set values. ROM Styles
associated to modified Style-Presets are identi-
fied by an asterisk (*) after the Style name.
Pressing F7 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SOUNDS (F8)
This operation restores the Sound configuration
to the original factory-set situation, cancelling all
User edited Sounds previously stored to user lo-
cations. This operation is particularly useful to
restore the original PS/GPS sound set (over 1,000
sounds) after loading a sound configuration from
a previous series PS/GPS disk (about 600
sounds) using the Load All Sounds or Load Block
procedures.
Pressing F8 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
○○○○○○○○○○○○○○○○○○○○○○
8•8 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
8•8 Reference Guide
RESTORE ALL (F3)
This operation cancels all user programmed data
currently in RAM (Presets, User Styles, Style-
Presets, Songs) and restores the instrument to
its factory-set status (RAM empty).
Pressing F3 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLES (F4)
This operation cancels all User Styles in RAM
(including User Style-Presets) residing in the User
1, 2, 3 and 4 buttons of the STYLE GROUPS.
The User slots are restored to the factory-set
conditions (empty: “User”).
Pressing F4 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE PRESET (F5)
This operation cancels all user-programmed Pre-
sets in RAM residing in the 8 buttons of the PRE-
SET GROUPS. The status of the Preset param-
eters are restored to the factory-set values.
Pressing F5 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SONGS (F6)
This operation cancels all Song in RAM. The
Songs memory is restored to the factory-set sta-
tus (empty: “User”).
Pressing F6 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLE-PRESET (F7)
This operation cancels all user-programmed
Style-Presets associated to the ROM STYLES.
The status of the Style-Preset parameters are
restored to the factory-set values. ROM Styles
associated to modified Style-Presets are identi-
fied by an asterisk (*) after the Style name.
Pressing F7 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SOUNDS (F8)
This operation restores the Sound configuration
to the original factory-set situation, cancelling all
User edited Sounds previously stored to user lo-
cations. This operation is particularly useful to
restore the original PS/GPS sound set (over 1,000
sounds) after loading a sound configuration from
a previous series PS/GPS disk (about 600
sounds) using the Load All Sounds or Load Block
procedures.
Pressing F8 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE ALL (F3)
This operation cancels all user programmed data
currently in RAM (Presets, User Styles, Style-
Presets, Songs) and restores the instrument to
its factory-set status (RAM empty).
Pressing F3 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLES (F4)
This operation cancels all User Styles in RAM
(including User Style-Presets) residing in the User
1, 2, 3 and 4 buttons of the STYLE GROUPS.
The User slots are restored to the factory-set
conditions (empty: “User”).
Pressing F4 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE PRESET (F5)
This operation cancels all user-programmed Pre-
sets in RAM residing in the 8 buttons of the PRE-
SET GROUPS. The status of the Preset param-
eters are restored to the factory-set values.
Pressing F5 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SONGS (F6)
This operation cancels all Song in RAM. The
Songs memory is restored to the factory-set sta-
tus (empty: “User”).
Pressing F6 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE STYLE-PRESET (F7)
This operation cancels all user-programmed
Style-Presets associated to the ROM STYLES.
The status of the Style-Preset parameters are
restored to the factory-set values. ROM Styles
associated to modified Style-Presets are identi-
fied by an asterisk (*) after the Style name.
Pressing F7 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
RESTORE SOUNDS (F8)
This operation restores the Sound configuration
to the original factory-set situation, cancelling all
User edited Sounds previously stored to user lo-
cations. This operation is particularly useful to
restore the original PS/GPS sound set (over 1,000
sounds) after loading a sound configuration from
a previous series PS/GPS disk (about 600
sounds) using the Load All Sounds or Load Block
procedures.
Pressing F8 prompts a request to confirm the
operation with ENTER or cancel with ESCAPE.
To Next Page
Loading...
Need help?
General
