General Dynamics URC-200 (V2) - Page 64

General Dynamics C4 Systems URC-200 (V2)
54
Table 11 – Remote Transceiver Operation Commands (Continued)
CODE NAME DESCRIPTION
EQUIVALENT
TRANSCEIVER
KEYPAD
COMMAND
M
Note 1
Modulation Mode
TRANSMIT/RECEIVE
The “M” Command followed by a 0 or 1
selects the transmit and receive modulation
mode that is to be displayed and used.
"M0" = TRANSMIT/RECEIVE AM
"M1" = TRANSMIT/RECEIVE FM
AV
4
AM/FM
(See Paragraph 4.4.6.3)
N
Note 1
Modulation Mode
TRANSMIT only
The “N” Command followed by a 0 or 1
selects only the transmit modulation mode
that is to be displayed and used.
"N0" = TRANSMIT AM
"N1" = TRANSMIT FM
R/T
←
AV
4
AM/FM
(See Paragraphs 4.4.6.3
And 4.4.6.5)
X
Note 1
Text Mode
The “X” Command followed by a 0 or 1
selects between PT (Plain Text, Voice) and
CT (Cipher Text, Data).
"X0" = Plain Text (PT)
"X1" = Cipher Text (CT)
(Returns a NAK if in Aviation Mode)
For transceivers with the EBN-30 Option:
If the 150Hz Tone Squelch is activated the
transceiver reverts to the Plain Text (PT)
mode only.
5
PT/CT
(See Paragraph 4.4.6.4)
Q
Store Function
The “Q” Command stores the entered data
in EEPROM for the current preset channel.
STO
(See Paragraph 4.4.6.6)
C
Scan list member
The “C” Command followed by a 0 or 1
selects whether the current preset channel
is ON or OFF the Scan List.
"C0" = OFF the scan list
"C1" = ON the scan list
7
SCNLST
SCAN
(See Paragraph 4.4.6.7)