GeoVision GV-IPCamera Series User Manual

182
F. Re-install the cap (part 3) with the supplied big concave hexagon
wrench. Make sure the cap is installed tightly to waterproof the
camera.
4. Thread audio wires (optional) into the camera.
A. Rotate to remove the cap of the conduit connector.
B. Take out and disintegrate the connector. You should have 3 parts
too.
C. Thread the audio wires from the back panel, remove the plugs of
part 1 and thread through the 3 parts of the connector.
Plug

GeoVision GV-IPCamera Series Specifications

General

Brand	GeoVision
Model	GV-IPCamera Series
Category	Security Camera
Language	English