Gerber Dimension 200 - User Manual

1
Introduction
The Dimension 200 is a router/engraver for three-dimensional
signage created for use with the GRAPHIX ADVANTAGE or
other computer systems along with ART Path software.
The ART Path Software Option allows the GRAPHIX
ADVANTAGE to fully control the routing operation, enabling
you to send jobs directly from ART Path on the GRAPHIX
ADVANTAGE through the ADVANTAGE Router Control
(ARC) station.
The Dimension 200 can cut designs from a variety of materials, as
well as draw all types of text or graphics. In addition, the
Dimension 200 is an excellent solution for creating ADA-
compliant (Americans with Disabilities Act) signage.
Warning: THE DIMENSION 200 IS A COMPUTER-
CONTROLLED MACHINE TOOL AND SHOULD BE
OPERATED ONLY BY TRAINED OPERATORS. THE SAFETY
GUIDELINES IN THIS MANUAL MUST BE FOLLOWED AT
ALL TIMES TO AVOID RISK OF INJURY.
Manual Contents
This manual provides installation, operation, and maintenance
procedures as well as safety guidelines for the Dimension 200.
Covering the basic information needed for using the Dimension
200, it is arranged as follows:

Router requirements and package contents

Stand assembly instructions

Router and optional equipment installation instructions

Safety guidelines

Principles of operation

System preparation and use

Summary

Router Requirements

Electrical Requirements

Details specific power requirements for the Dimension 200 system, including voltage and amperage.

Router Package Contents

Tool Kit Contents

Router Stand Assembly

Assembly Steps

Instructions for assembling the router stand, including leg, stand, and table mounting.

Router Installation

Before You Begin

Pre-installation warnings and checks, including powering off systems.

Component Connections

Steps for connecting power, data, and system components like the ARC station and electrical box.

System Setup

Procedure to configure the ARC station for the Dimension 200 system after initial connections.

Safety Guidelines

Control Functions

Power-Up Tests

Procedure for ARC station diagnostic self-tests upon power-up and error handling.

Job Setup & Control

Covers using the Select menu for job setup, absolute positioning, and feed rate adjustments.

Gerber Dimension 200 Specifications

General

Brand	Gerber
Model	Dimension 200
Category	Engraver
Language	English