Operating Principles 63
5.
Press the right or left arrow key to scroll through the units
choices (inches or millimeters).
6.
Press SELECT to save the selected choice.
The system beeps twice and returns to the STOP READY or
STOP JOB mode displayed.
To turn Auto Scroll on or off
1.
Press SELECT while in the STOP READY or STOP JOB mode.
2.
Press the right or left arrow key until Auto Scroll: appears.
3.
Press SELECT.
4.
Press the right or left arrow key to display On and Off.
5.
Press SELECT to save the choice.
DEFAULT
This function allows you to reset all value parameters back to the
factory default settings.
To reset the defaults
1.
Press SELECT while in the STOP READY mode.
2.
Press the right or left arrow key until Default appears.
3.
Press the SELECT key to reset all value parameters to the
factory default settings. The system beeps twice and returns
to the STOP READY mode.
Units:
Inches
To Next Page
Loading...