Gerber Dimension 200 - Front Panel

42
Dimension 200
FRONT PANEL
The front panel of the ARC station consists of a message display
panel and nine function keys:

START/STOP

RESET

Z INIT

SELECT

right, left, up, and down arrow keys.
The ENTER key is not used.
Display Panel
The bottom right of the message display panel may contain
indicators for the operator:

W, w - Alternating uppercase and lowercase indicates that
the router is waiting for a job.

J, j - Alternating uppercase and lowercase indicates that
there is a job ready for routing. Pressing START will begin or
continue processing the job.

I, i - Alternating uppercase and lowercase indicates the job is
incomplete, which occurs when a partial job is sent from ART
Path. Power interruption at the GRAPHIX ADVANTAGE or a
pause status in the Plot Spooler application will cause partial
transmission.
WARNING: WHEN THE INCOMPLETE JOB INDICATOR
(I,I) AND START JOB ARE DISPLAYED, THE ROUTER
CARRIAGE MAY MOVE WITHOUT FURTHER WARNING.
The top right of the message display panel at times may contain
an asterisk (*). When a job is running and the operator presses
the STOP key, the asterisk appears to show that the machine has
received the message and will pause at the next logical point. The
router will resume cutting when the START key is pressed again.