Cleaning and Maintenance 97
TWICE WEEKLY CLEANING
Clean the T-Vac air filter twice a week or even more frequently if
there is heavy use. Debris buildup in the filter will reduce vacuum
hold-down and may cause the vacuum to overheat and fail.
SUPPLIES
The following tools and supplies are recommended for the
cleaning procedures:
Shop vacuum
Lint-free cloth
Hand broom
1" (25 mm) nylon or natural bristle brush
2.5 mm and 4 mm hex head wrenches
Light machine oil
Daily Cleaning
Y AXIS WAYS
The Y axis ways are the shafts on which the beam moves. There is
one Y axis way on each side of the work table, running the length
of work table.
1.
Locate the Y axis ways.
2.
Clean the Y axis ways by wiping them with a lint-free cloth.
To Next Page
Loading...