35
Safety Guidelines
Warning: THE DIMENSION 200 IS A HIGH-SPEED
CUTTING MACHINE. ITS USE MAY BE HAZARDOUS IF
YOU DO NOT OBSERVE THE FOLLOWING PRECAUTIONS.
THESE GUIDELINES ARE NECESSARY FOR THE SAFE AND
EFFICIENT OPERATION OF THE DIMENSION 200.
WARNING: DO NOT STORE WET ALUMINUM CHIPS IN A
CLOSED CONTAINER AND DO NOT USE THE VACUUM
HOSE TO CLEAN UP WET ALUMINUM. WET ALUMINUM
PRODUCES HYDROGEN GAS. THIS GAS MAY REACH
EXPLOSIVE CONCENTRATIONS WHEN WET ALUMINUM
CHIPS ARE STORED IN A CLOSED CONTAINER.
1.
Only a trained operator should attempt to run the equipment.
2.
Wear protective eyewear, such as goggles or safety glasses,
which cover the front and sides of the face.
3.
Do not use the router in a damp or wet location.
4.
Do not store wet aluminum chips in a closed container.
5.
Do not use the vacuum hose to clean up wet aluminum.
6.
Stand in front of the ARC station during system operation to
provide easy access to the RESET key and the main power
switch on the electrical box. (This also prevents any clothing
from getting caught in the machine.)
7.
Keep the work area clear for easy access to the main power
switch.
8.
Unplug or turn off the router motor when changing tools.
9.
Tie back or cover long hair.
To Next Page
Loading...