100 Dimension 200
Weekly Inspection
Component What To Check For
Z axis ways
Debris buildup
X and Y axis ways
Debris buildup
Electrical box air filter
Debris buildup on filter
element
Weekly Cleaning
The weekly cleaning and maintenance procedures include the
following:
cleaning and oiling the ways
cleaning the electrical box air filter
Z AXIS WAYS
1.
Locate the Z axis ways on either side of the router motor.
2.
Lower the router motor to its lowest position by turning the Z
axis adjustment knob.
3.
Clean and oil the upper part of the Z axis ways.
4.
Use a lint-free cloth to clean the way.
5.
Lightly oil the Z axis way with light machine oil.
6.
After cleaning the upper part of the Z ways, raise the router
motor to its highest position by turning the Z axis adjustment
knob.
7.
Clean and oil the lower part of the Z axis ways.
8.
Use a lint-free cloth to clean the way. Lightly oil the way.
To Next Page
Loading...