System Preparation and Use 83
USING TAPE
Follow these guidelines when using tape to attach the workpiece
to the table mats:
Place the tape in closely spaced strips.
Do not overlap the strips.
Make sure the centers of letters like O, B, and P are held
securely by the tape.
To use double-sided tape
Follow these steps when using double-sided tape to secure the
workpiece to the sacrificial material:
1.
Lay the tape across the underlying material.
2.
Place the workpiece on top of the tape.
3.
Press firmly to bond securely.
USING SPRAY ADHESIVE
When using spray adhesive, refer to the manufacturer's
suggestions on the can.
WARNING: Apply spray adhesive only in a well-ventilated
area.
To Next Page
Loading...