1
Introduction
The Dimension 200
is a router/engraver for three-dimensional
signage created for use with the GRAPHIX ADVANTAGE or
other computer systems along with ART Path software.
The ART Path Software Option allows the GRAPHIX
ADVANTAGE to fully control the routing operation, enabling
you to send jobs directly from ART Path on the GRAPHIX
ADVANTAGE through the ADVANTAGE Router Control
(ARC) station.
The Dimension 200 can cut designs from a variety of materials, as
well as draw all types of text or graphics. In addition, the
Dimension 200 is an excellent solution for creating ADA-
compliant (Americans with Disabilities Act) signage.
Warning: THE DIMENSION 200 IS A COMPUTER-
CONTROLLED MACHINE TOOL AND SHOULD BE
OPERATED ONLY BY TRAINED OPERATORS. THE SAFETY
GUIDELINES IN THIS MANUAL MUST BE FOLLOWED AT
ALL TIMES TO AVOID RISK OF INJURY.
Manual Contents
This manual provides installation, operation, and maintenance
procedures as well as safety guidelines for the Dimension 200.
Covering the basic information needed for using the Dimension
200, it is arranged as follows:
Router requirements and package contents
Stand assembly instructions
Router and optional equipment installation instructions
Safety guidelines
Principles of operation
System preparation and use
To Next Page
General