2 HS15
plus
Convenience
HS15
plus
has many features that make it easy and convenient to use:
Accepts any standard Gerber materials in 15-inch wide rolls.
Draws, cuts, and pounces up to 13.0 inches high. Using the
GRAPHIX ADVANTAGE
system Panel feature, the HS15
plus
can cut
text or graphics in strips up to 96 feet long.
Adjustable tool force for uniform cutting with the turn of a dial.
Servo motors for quiet, fast performance.
On-board 4K buffer in addition to
GRAPHIX ADVANTAGE
buffers.
Quick installation.
Simple user panel requires minimum training.
About This Manual
This manual explains the installation and operation of the HS15
plus
plotter. It assumes you are familiar with the
GRAPHIX ADVANTAGE
system. It tells you how to assemble, install, operate, and maintain your
HS15
plus
as follows:
The “Introduction” provides information about the HS15
plus
and a
list of contents of the shipping crates.
“Installation” contains instructions for plotter assembly and
connection to the
GRAPHIX ADVANTAGE
.
“Materials and Tools” gives information about material and
loading the vinyl, and discusses procedures on using and
replacing the pen, knives, and pounce wheel.
“Operation” provides information about plotter operation and slew
key functions.
“Special Diagnostics” presents examples and instructions for
diagnostic tests.
To Next Page
Loading...
Need help?
General
