1
INTRODUCTION
The HS15
plus
is a state-of-the-art 15-inch plotter designed for use with
the
GRAPHIX ADVANTAGE
® system.
Performance
The HS15
plus
is designed to precisely register graphics up to 50 yards
long using carbide blades for crisp, sharp cuts.
The HS15
plus
features Gerber's exclusive Knife Mode Switching
technology, which offers you a choice of two cutting modes selected
from the plotter keypad:
Tangential Knife Mode
keeps the blade aligned with the direction
of plotting motion for cutting thick materials (such as sandblast
resist) and for pouncing patterns.
Swivel Knife Mode
cuts faster than tangential knife mode for rapid
cutting of all but the most demanding materials, such as sandblast.
Gerber's exclusive Corner Correcting Technology
ensures sharp,
easy-to-weed corners in swivel knife mode.
Able to handle complex jobs, the HS15
plus
cuts at 20 inches per second
on a straight line (X or Y axis). When used with the
GRAPHIX
ADVANTAGE
, the HS15
plus
uses the Plot Spooler feature to queue and
transmit jobs while the operator continues to design at the system.
To Next Page
Loading...
Need help?
General
