Introduction 3
“Error Conditions” lists common error conditions and corrective
procedures.
“Maintenance” provides cleaning, lubricating, and fuse replacement
instructions.
“Plotter Adjustments” includes a troubleshooting guide as well as
symptoms of plotter adjustment problems.
Conventions
The following conventions are used in this manual:
Note: A note contains important information that could affect successful
completion of a task.
CAUTION: A caution statement contains information that, if
not observed, could result in damage to the equipment.
WARNING: A warning statement contains information that, if not
observed, could result in personal injury.
Support Information
Gerber pioneered plotter technology with quality engineering designs
that consider operator convenience. Performance of the HS15
plus
plotter
is assured by:
24 hours of finished product testing before shipment, in addition to
testing during the manufacturing process.
Customer support through Gerber Field Service Department.
Step-by-step user's manual.
If you require assistance installing or operating your HS15
plus
plotter,
contact your distributor or Gerber Field Service at 800-828-5406 (in the
USA), or fax at 203-645-2448.
To Next Page
Loading...
