58 HS15
plus
X AXIS BACKLASH ADJUSTMENT
Symptoms
Text cut in Axis Swap mode has closure problems.
Objective
To adjust the mesh of the X axis gear and the X motor pinion to produce
good letter quality in Axis Swap mode.
Adjustment Procedure
Please call Gerber Field Service at 800-828-5406 for assistance. You
may find it helpful to refer to the plotter diagram in the Appendix while
performing the adjustment procedure.
Y AXIS BACKLASH ADJUSTMENT
Symptoms
Text cut in Normal mode has closure problems.
Objective
To adjust the mesh of the jackshaft gear with the Y motor pinion to
produce good letter quality in Normal mode
Adjustment Procedure
Please call Gerber Field Service at 800-828-5406. You may find it
helpful to refer to the plotter diagram in the Appendix while performing
the adjustment procedure.
To Next Page
Loading...
