Getinge 86 SERIES Technical Manual

Page 25 of 174
<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
Time menu (1.4.2.1.1)
To set the time, follow the instructions in the menu tree below. Enter password
and press S when the calendar menu has been chosen. To set the time, press
S. To change the time press H and J until the desired time is displayed.
Then use
I or K to change field. When the value is correctly set, press S to
confirm the change.
1.1
1.2
1.4.1
1.3
1.4
GETINGE PACS 300
VERSION 3.51 (0283)
P01 PROGRAM NAME
PARAM1 PARAM2
MACHINE NAME
PHASE NAME
CYCLE COUNTER
00000
SETTINGS
PRINT LAST CYCLE
SYSTEM
1.4.2.1
CALENDAR
CALIBRATION
1.4.2.2
1.4.2.3
CALIBRATION
CONFIGURATION
CONFIGURATION
DIP SWITCHES
1.4.2.4
1.4.2.5
1.4.2.6
DIP SWITCHES
SERVICE
SERVICE
SAVE RAM IN FLASH
SERVICE
SAVE RAM IN FLASH
1.4.2
SYSTEM
ABOUT
ENTER PASSWORD *
* Service personnel password required
1.4.2.1.1
TIME HH:MM:SS
15:45:50
1.4.2.1.2
DATE YYYY/MM/DD
2006/08/23
Date menu (1.4.2.1.2)
To set the date, follow the instructions in the menu tree below. Enter password
and press S when the calendar menu has been chosen. To set the date, press
S. To change the time press H and J until the desired date is displayed.
Then use
I or K to change field. When the value is correctly set, press S to
confirm the change.
1.1
1.2
1.4.1
1.3
1.4
GETINGE PACS 300
VERSION 3.51 (0283)
P01 PROGRAM NAME
PARAM1 PARAM2
MACHINE NAME
PHASE NAME
CYCLE COUNTER
00000
SETTINGS
PRINT LAST CYCLE
SYSTEM
1.4.2.1
CALENDAR
CALIBRATION
1.4.2.2
1.4.2.3
CALIBRATION
CONFIGURATION
CONFIGURATION
DIP SWITCHES
1.4.2.4
1.4.2.5
1.4.2.6
DIP SWITCHES
SERVICE
SERVICE
SAVE RAM IN FLASH
SERVICE
SAVE RAM IN FLASH
1.4.2
SYSTEM
ABOUT
ENTER PASSWORD *
1.4.2.1.1
TIME HH:MM:SS
15:45:50
1.4.2.1.2
DATE YYYY/MM/DD
2006/08/23
* Service personnel password required

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English