Getinge 86 SERIES Technical Manual

<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
Page 72 of 174
V1577
Loading language files
Note:
Always make a backup copy before starting work on updating system programs.
1. Connect a PC to the machine; see under Connecting a PC.
2. CheckthatthemachineisinSTANDBYmode.
3. Make a backup copy by starting CS 1000 and choosing:
Tools/PACS RAM/Upload To File...
4. Savethe*.prmleinyourchosenlocation.
The program will report an error during conversion. Disregard this. To check that
conversionwassuccessful,checkthesizeofthe*.prmle.Thesizeoftheleshould
be 84416 bytes.
5. If using an existing card, do a Save RAM In Flash (the set calibration values will
then be automatically moved back after loading of the program(s)).
6. Switch off the power to the machine with the main switch.
V1983

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English