P02 OP-D
F00 PWR FAILURE
Alarm
If the red lamp at O lights up, the process has been aborted because of a fault.
The display shows a fault code.
Acknowledging a fault code
Acknowledge the fault code by:
Make a note of the fault code•
Cancel the acoustic signal by pressing • U. The machine remains locked but the
program has been stopped. The display shows the password entry menu.
Correct the fault or call service personnel.•
Enter the password (558387) using the arrow keys and press • S.Allliquidis
drained from the machine and the soiled-side door is unlocked*.
Open the door and remove the items.•
The items in the machine are not clean and must be washed again from the
beginning with a new program.
If the items are still hot, handle them with care to avoid burns.
* If the drain pump is faulty, water cannot be drained from the machine and the fault cannot be put right until the
doorhasbeenopened.Thesoiled-sidedoorisunlockedassoonasthepasswordisconrmed.
To Next Page
Loading...
Need help?
General
