Getinge 86 SERIES Technical Manual

Page 53 of 174
<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
P-parameters
Using any code down to the supervisor code, the following parameters (P-parameters)
can be changed.
PH0220 PRE-RINSE CW
Parameter Setting range
Pre-rinsing time 0 - 600 s
PH0220 PRE-RINSE CW+HW
Parameter Setting range
Pre-rinsing time 0 - 600 s
PH0220 PRE-RINSE HW
Parameter Setting range
Pre-rinsing time 0 - 600 s
PH0025 WASHING
Parameter Setting range
Water type CW, HW, DW
Dosing pump 1, 2, 3, 4
PH0025 WASHING 2
Parameter Setting range
Dosing pump 1, 2, 3, 4
PH0300 NEUTRALIZING
Parameter Setting range
Dosing pump 1, 2, 3, 4
PH0500 CHEMICAL DISINF
Parameter Setting range
Dosing pump 1, 2, 3, 4
PH0330 RINSE 1
Parameter Setting range
Water type CW, HW, DW
Rinse time 0 - 600 s

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English