Getinge 86 SERIES Technical Manual

<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
Page 58 of 174
Fault indications
The machine cannot be started until the fault has been put right.
The following messages can be displayed:
Dose 1 low level Empty container alarm 1. If detergent 1 is finished, a handling
code is generated. The alarm is reset automatically when
detergent is added.
Dose 2 low level Empty container alarm 2. If detergent 2 is finished, a handling
code is generated. The alarm is reset automatically when
detergent is added.
Dose 3 low level Empty container alarm 3. If detergent 3 is finished, a handling
code is generated. The alarm is reset automatically when
detergent is added.
Dose 4 low level Empty container alarm 4. If detergent 4 is finished, a handling
code is generated. The alarm is reset automatically when
detergent is added.
Note:
The last process had access to detergent. A message is displayed for future processes.
Red lamp: disinfection
not achieved
Fault message
or fault code
V1363
P02 OP-D
DOSE 1 LOW LEVEL
P02 OP-D
DOSE 1 LOW LEVEL
Handling alarms
Handling alarms appear on the display in plain text.

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English