Getinge 86 SERIES Technical Manual

Page 79 of 174
<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
16. Check that the value (E) rises to 200.
17. Cancel the acoustic signal by pressing Close (F).
18. Press Y and Z at the same time. Output appears on the display.
19. Press [. Sel. Type appears.
20. Choose Lin. with Z.
21. Press [.
22. Press Y and Z at the same time twice to log out of the conductivity meter.
F
V1566

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English