GRAPHTEC FC2250 Series - Main Specifications

8-2
Chapter 8 SPECIFICATIONS
8.1 Main Specications
FC2250-60VC FC2250-120VC/MG/ES FC2250-180VC/ES
Conguration Flatbed
Effective cutting area
610 x 920 mm 1200 x 920 mm 1740 x 920 mm
Media hold-down method VC models: Vacuum suction, MG models: Magnetic
ES models: Electrostatic adhesion
Maximum cutting speed
400 mm/s
Cutting force Tool holder 1 cutting force: Max. 4.9 N (500 gf), 40-step range (1 - 40: in increments of 1)
Tool holder 2 cutting force: Max. 9.8N (1 kgf), 40-step range (2 - 80: in increments of 2)
Minimumcharactersize Approx. 10 mm square (varies with the character font and media)
Mechanical resolution
0.0025 mm (2.5 µm)
Programmable resolution
GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ mode: 0.025 mm
Distance accuracy Within±0.1%ofthedistancemoved(plottermode)
Perpendicularity Within 0.5/900 mm (plotter mode)
Repeatability Within 0.1 mm (plotter mode/cutting mode)
Number of tools 2
Pen types Cutterpens,Waterbasedber-tippen,Oil-basedballpointpens,Disposableinkpens*
1
Cutting media Markinglm(vinyl,uorescent,reective),stiffpaper/cardupto0.5mmthick,sandblastrubber
sheetsupto1.0mmthick,high-intensityreectivelm,polystyrenefoamsheets,E/F/Gute
cardboard*
2
Interfaces RS-232C, USB 2.0 (full speed); auto-switching
Buffersize
2MB
Command sets GP-GL, HP-GL™ emulation (menu-selectable)
LCD panel 20 characters x 2 lines
Registration mark reading
function
Provided
Power supply 100to120VAC,50/60Hz,1.2Amax
220to240VAC,50/60Hz,0.7Amax
Operating environment 10to35°C,35to75%RH(non-condensing)
Guaranteed precision operating
environment
16to32°C,35to70%RH(non-condensing)
External dimensions
(H x W x D)
Horizontal 857 x 920 x 1285 mm 944 x 1568 x 1285 mm 944 x 2068 x 1285 mm
Tilted at 60° - *
3
1687 x 1568 x 987 mm 1687 x 2068 x 987 mm
Weight (including stand)
Approx. 58 kg Approx. 69 kg Approx. 74 kg
Option
Vacuum pump (blower) [VC models only]
*1: Disposable ink pens cannot be used with tool holder 2.
*2: When the CB30UC cutter blade (option) is used to cut E-ute cardboard
*3: The writing panel on VC models cannot be tilted.