GRAPHTEC FC2250 Series - Model Names and Basic Specifications; Standard AccessorEs

1-2
Chapter 1 PRODUCT SUMMARY
1.1 Model Names and Basic Specications
The FC2250 series comprises the following models.
Model Media hold-down method Cutting area
FC2250-60VC Vacuum suction 610 x 920 mm
FC2250-120MG Magnetic
1200 x 920 mmFC2250-120ES Electrostatic adhesion
FC2250-120VC Vacuum suction
FC2250-180ES Electrostatic adhesion
1740 x 920 mm
FC2250-180VC Vacuum suction
1.2 Standard Accessories
Item Description Q'ty
Power cable 1
Cutter pen set PHP31-CB15B-HS, CB15U-2SP, CB15U-K30-5SP 1 set
Waterbasedber-tippen
KF552-BK 1
Sheet holder plates For MG models only (2 large, 2 medium, 4 small) 1 set
Hexagon wrench For M4 bolts 1
Height adjustment plates 10 mm, 4 mm height
1 of each
Durableexiblehose
For VC models only, 1.5 to 5 m (can expand/contract)
Connectionborediameter:φ38mm(-60),φ50mm(-120/180)
1
Hose band ForVCmodelsonly,φ38mm(-60),φ50mm(-120/180) 2
Vacuum pump installation base
For VC models only 1
USB cable 1
CD-ROM User’s manual, driver, other software 1
Quick Start Guide
1
Usage Precautions
1
•
The vacuum pump itself is an option. It is not provided with the VC models.
•
Make sure that the vacuum pump used with a VC model is afxed with either a label showing compliance with the
relevant safety standard or with the CE marking.