GRAPHTEC FC2250 Series - Features

1-3
Chapter 1 PRODUCT SUMMARY
1.3 Features
•
TheFC2250seriesplottersprovideasharply-denedcuttingedge.
•
The cutting force can be freely selected in a 40-step range (max. 9.8 N[1 kgf]).
The maximum cutting speed is 400 mm/s.
The high acceleration rate increases the overall cutting speed.
•
TheFC2250cancutnotonlymarkinglm,butalsothickpaper,sandblastrubberandothermedia.Therefore,
signboards, artwork for production purposes and other signage can be easily produced.
•
The standard 2-Mbyte buffer RAM unit greatly reduces the load on the host computer.
•
The FC2250 series uses a digital servo drive system for highly precise cutting results at high speed.
•
Cutter blade replacement is straightforward.