CHAPTER 3
PREPARATIONS FOR CUTTING/PLOTTING
PRODUCT SUMMARY
3.1 Basic Operational Flow
3.2 Connecting to a Computer
3.3 Mounting the Tools
3.4 Adjusting the Pen Carriage Height
3.5 Tilting the Writing Panel
3.6 TurningonthePlotterandInitialization
3.7 Loading the Medium
3.8 Setting the Cutting Conditions
(Setting Conditions)
3.9 Running a Cutting Test
3.10 Achieving Optimum Cutting Results
3.11 Setting the Cutting Origin
3.12 Using the Copy Function
3.13 Using the Hold Function
To Next Page
Loading...
