Precautions on the Handling of Cutter Pens
This product uses a cutting blade. To prevent injuries (when replacing the cutter blade, installing the cutter
pen, etc.), take the following precautions when handling the cutter blade.
Cutter Blade
Thebladesaresharp.Becarefulnottocutyourngersorprickyourselfwhenhandlingthecutterpen.
Return used blades to the accessory cutter blade case and throw them all out together when the whole case has been
lled.
Cutter Pen
The tip consists of a sharp blade. Do not extend it too far. When it is not in use, cover it with the protective cap supplied.
Cutter blade
Protective cap
The methods for extending the blade and replacing it are described in Chapter 3 of this manual.
After Mounting the Cutter Pen
After the power has been turned on, and during operation, do not touch the pen tip. It is dangerous.
To Next Page
Loading...
