GRAPHTEC FC4100 series - Page 121

Test Modes and Troubleshooting ♦
C6 - 11
Problem Cause Solution See section
Media is loaded but
the LOAD PAPER !!
message appears.
Media that is nearly
transparent cannot be
detected by the paper
sensors.
Disable the paper
sensors using media
size sensor control in
the background
settings.
Media size sensor
setting in the
Background settings.
Strong reflected light
is preventing the
paper sensors from
detecting the media.
Change the position
of the light source.
Loaded media has
not been positioned
over the paper
sensors.
Properly reload the
media.
Loading Media