Preparing to Cut ♦
C3 - 4
Selecting a Function Menu
When the plotter is in MENU mode (the MENU lamp is lit), each of the functions listed below in
the “Function Selection” column can be accessed by pressing the NEXT key until the desired
menu appears and then pressing the select key indicated by a box.
Menu Function Selection Submenus
NEXT
NEXT PEN UP/DOWN
BUFFER CLEAR
FEED
NEXT INTERFACE STEP SIZE (GP-GL only)
RS-232C
COMMAND
AREA PARAMETERS ORIGIN (GP-GL only)
AREA
EXPAND
PAGE LENGTH
FUNCTION 1 ROTATE
MIRROR
SCALE
FUNCTION 2 DATA SORTING
AXIS ALIGNMENT
AUTO PRE FEED
TANGENT EMULATION
NEXT OPTION 1 PEN UP SPEED
OFFSET ANGLE
OFFSET FORCE
STEP PASS
OPTION 2 DISTANCE ADJUST
TEST
Initial Menu
When the paper set lever is lowered, the initial menu appears on the LCD.
Menu Function Selection Submenus
INITIAL
MENU
F4 Key
AUTO PRE FEED →
INITIAL FEED SPEED →
INTERFACE STEP SIZE
RS-232C
COMMAND
To Next Page
Loading...
