GRAPHTEC FC4100 series - Pin Assignment of the Parallel Connector

Setting the Interface Functions ♦ C7 - 8
Pin Assignment of the Parallel Connector
The pin assignment of the Centronics-compatible parallel interface connector is described below.
Pin No. Signal Name Pin No. Signal Name
1 STROBE 19 GND
2 DB 0 20
GND
3 DB 1 21
GND
4 DB 2 22
GND
5 DB 3 23
GND
6 DB 4 24
GND
7 DB 5 25
GND
8 DB 6 26
GND
9 DB 7 27
GND
10 ACK 28 GND
11 BUSY 29
GND
12 GND 30
GND
13 SLCT 31 Not used
14 Not used 32 ERROR
15 Not used 33
GND
16 GND 34 Not used
17 Not used 35
+ 5V pulled up.
18 + 5V pulled up 36
Not used