GRAPHTEC FC4100 series - Chapter 1: Out of the Box; Checking the Contents

Out of the Box ♦ C1 -
1
Chapter 1 Out of the Box
This chapter describes plotter nomenclature and how to install your plotter.
Checking the Contents
After unpacking your plotter, check that the standard accessories shown below are all present. If
any accessory is missing, contact your sales representative or the nearest Graphtec dealer.
Accessories
Power Cord
(The configuration
pictured may differ from
the actual cords
supplied.)
Cutter Pen Set
Cutter Holder
(PHP32-CB09N)
with 2 cutter blades
(CB09UA)
Black Water-Based
fiber-tip pen
KF552-BK-P
User’s Manual
RS-232 Cable
w/adapter
(US Market only)
Accuload™
Stand Kit
(FC4100-75 Option)
(FC4100-100 Standard)
(FC4100-130 Standard)