Advanced Functions and Settings ♦
C4 - 2
ORIGIN - Setting the Cutting Origin
This function allows you to move the origin point of cutting.
Use the UP, DOWN, RIGHT or LEFT ARROW keys to move the cutter to the
desired origin position.
Press the ORIGIN key. The beeper sounds and the LCD displays a message
indicating that the new origin is effective.
Origin Point with ROTATE function
NOTE: The coordinates being displayed represent displacements along the X and Y-axes from
the original origin.
NOTE: If you intend to use the ORIGIN function in combination with the ROTATE or MIRROR
function, be sure to set the ORIGIN function first.
To Next Page
Loading...
