EasyManua.ls Logo

GRAPHTEC FC4100 series - Handling the Cutting Blades; Handling the Cutters

GRAPHTEC FC4100 series
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Special Precautions SP -
2
Handling the Cutting Blades
WARNING: Cutter blades are used with this plotter. Be sure to handle the cutter blades and
holders with care to prevent bodily injury.
WARNUNG: Benutzen Sie diese Messer vorsichtig, um Verletzungen zu vermeiden.
n Cutter blades are very sharp. While handling a
cutter blade or cutter pen, be careful to avoid
cutting your fingers or other parts of your body.
n Die Messereinsätze sind sehr scharf! Um
Verletzungen vorzubengen, müssen die
Messereinsätze mit vorsicht gehandhabt
werden.
n Promptly return used blades to the cutter case
provided. When the case is completely filled,
discard the used blades together with the case.
Handling the Cutters
n The tip consists of a sharp blade so make sure
not to extend it too far.
n Instructions on replacing the blade or adjusting
the blade length are provided in Cutters and Holders.

Table of Contents

Related product manuals